Black carbon-fiber-look film. Red-and-white Sports print. Car and styling props are not included.
SMALL DETAIL. EVERYDAY CONTACT.
Car Door Handle Protection Kit
For the part of your car you touch every day.
Eight self-adhesive films for the paint behind and alongside your door handles. A black carbon-fiber-look finish, with four cup pads and four matching handle strips in every kit.
- 4 cup pads + 4 handle strips in every kit
- Peel-and-stick films for suitable, intact surfaces
- One kit covers up to four compatible handles
Secure Shopify checkout. Available payment methods depend on your device and region.
What this kit is
Generic Sports-printed adhesive films, not a vehicle-maker part. The carbon-fiber-look pattern is decorative. Adds a film layer to selected contact areas; not scratchproof, impact protection or a repair for existing damage.
THE DAILY REACH. A SMALL EXTRA LAYER.
Your nails reach it.
Your keys get close.
Behind the handle is a small patch of paint that sees a lot of contact. Put a fitted film over that area instead of leaving it bare.
The separate handle strip finishes the look on the front flat face. Black texture. Red-and-white Sports print. One coordinated detail for the car you look after.
Make sure it fits your door
MEASURE FIRST. PEEL SECOND.
Check the shape. Then the size.
A useful detail starts with a good fit. Compare both pieces with your own door before peeling the backing.
- A cup pad needs a suitable smooth area behind a pull-style handle.
- The handle strip must fit the exterior handle without covering a keyhole, sensor or moving joint.
- Not for flush, pop-out or automated handles. Check conventional pull-out handles only.
- Do not apply to damaged, peeling, recently repainted or otherwise unsuitable surfaces. Ask your paint or wrap installer if unsure.
Each handle uses one cup pad behind it and one strip on the front flat face. All four must have suitable shapes and surfaces.
| Piece | Width × height |
|---|---|
| Cup pad | 8.2 × 9.0 cm 3.23 × 3.54 in |
| Handle strip | 12.7 × 1.6 cm 5.0 × 0.63 in |
Compare the supplied shapes and confirmed dimensions with your own handles. Not a guaranteed universal fit.
NO DRILLING. NO REPLACEMENT HANDLE.
A careful fit beats a rushed stick.
Check before peeling.
Hold each piece against the door. Check the shape, handle movement and any keyhole or sensor. Do not use the film where it obstructs a function.
Clean. Dry. Position.
Prepare an intact, smooth surface using a cleaner suitable for your vehicle finish. Let it dry completely. Avoid waxy or greasy residue; follow your vehicle's finish-care guidance.
Peel, align and smooth.
Peel the backing, position carefully and press firmly from the center outward. The cup pad goes vertically behind the handle; the strip goes on its front flat face. Do not stretch the film. Follow the supplied adhesive-care instructions and check it regularly.
OPEN THE PACK. KNOW WHAT YOU GET.
Four handles.
Eight little details.
One kit is one eight-piece set. The two-kit option is two complete sets of the same design.
Black carbon-fiber-look films with the red-and-white Sports print. Rounded, hourglass-sided cup pads and separate narrow strips.
Vehicle, tools, cleaner and other styling props are not included. Not a custom-printing product.
FOR THE CAR YOU MAKE YOUR OWN.
The little details
are part of the drive.
A black textured finish. A coordinated handle detail. A small way to look after the car that gets you there.
Choose your kitTHE USEFUL DETAILS.
Before you stick.
A good fit and careful preparation matter more than a big promise.
What exactly arrives in one kit?
One kit contains eight individual adhesive films: four cup pads for the area behind suitable door handles, plus four narrower handle strips. They are not eight complete door sets. No tools, cleaner, car accessories or spare films are included unless explicitly listed.
Will these fit my car?
Measure your handle and the cup behind it against both pieces. This kit is for compatible conventional pull-out handles, not flush, pop-out or automated handles. A kit can cover up to four suitable handles, but this is not a universal-fit promise. Keep keyholes, sensors and moving joints clear.
What are they made of? Is it real carbon fiber?
They are black carbon-fiber-look self-adhesive films with Sports print. The pattern is decorative, not a claim of structural carbon fiber or impact resistance. Exact film composition has not been confirmed.
What do the cup pads and handle strips do?
The cup pads add a film layer to the area where fingers and nails reach behind a suitable handle. The narrower strips sit on the exterior handle. They are intended as an extra contact layer and a styling detail, not as a scratchproof coating.
Will they fix scratches that are already there?
No. These films do not repair, polish out or remove existing damage. Inspect the paint before application. They do not prevent every scratch, dent or impact.
How do I apply them?
Check the fit with the backing still attached. Clean the intended surface with a finish-compatible product and let it dry. Peel, align carefully and smooth outward without stretching. Follow any supplied adhesive instructions. No installation-time or curing-time guarantee is made.
Can I use them on a wrap, matte finish or fresh paint?
Do not assume compatibility. Adhesive can affect delicate, damaged, wrapped or refinished surfaces. Ask your wrap or paint installer before use. Avoid peeling paint and do not cover a sensor, keyhole, moving joint or drainage path.
Can I remove or reuse them later?
Treat them as a single-application adhesive product. Removal can leave residue or affect a sensitive finish, so damage-free removal and reuse are not promised. Follow your vehicle's finish-care guidance and stop if the finish starts to lift.
How should I look after the films?
An adult should install them firmly and check them regularly. Wipe gently with a soft cloth. Avoid severe impact, high heat and strong acidic or alkaline cleaners. Adhesion depends on fit, surface preparation and conditions; long-term durability is not promised. Remove or seek advice if a film becomes loose or interferes with the handle.
Is this a vehicle-maker part?
No. This is a generic aftermarket kit, not a Toyota or other vehicle-maker OEM product. The Sports wording and carbon-fiber-look pattern are decorative. No manufacturer affiliation or model-specific fit is implied.
How many kits do I need?
One kit includes four cup pads and four handle strips, enough for up to four suitable handles after checking fit. Two kits contain eight cup pads and eight handle strips in total. Choose based on the handles you actually want to cover, not simply your vehicle's door count.
What about shipping and returns?
U.S. shipping is free for this offer. Delivery timing varies by destination; no arrival date is promised here. See our shipping and returns policies. Keep the backing intact while checking fit, and contact us if an item arrives wrong or damaged.
How does the two-kit price work?
Select two kits to use DOORDUO. It takes $2.50 off each eligible kit using the current native kit price. Checkout confirms eligibility, discounts and tax. Other discounts may not combine.
Where can I find shipping and returns information?
Read our shipping policy and returns policy. For help checking an item that arrived wrong or damaged, contact us with your order number.
Install with care. Check regularly.
Adult installation. Avoid severe impact, high heat and strong acidic or alkaline cleaners. Wipe with a soft cloth. Adhesion depends on preparation, fit and conditions. These films do not repair paint, make it scratchproof or guarantee residue-free removal.
EIGHT FILMS. ONE CONSIDERED DETAIL.
